 |
 |
|
PRODUCTS
THE ‘WIZARD
TRAP’
There is no other water trap like it.
Patented, the Wizard Trap is specifically designed to be compact
without compromising compliance to the appropriate Australian
standards. Fully watermark licensed to AS 2887 - Plastic Waste
Fittings.
The Trap
is manufactured of robust ABS plastic with a flow rate
of 50 litres per minute making it also suitable for baths,
basins, bar sinks, bidets, showers, laundry tubs and
air conditioning tundish. Jewellery and the like accidentally
dropped remains visible and retrievable from the top.
The compact nature of the Trap makes it ideal for use
in boats
This innovative
compact trap revolutionises the way pedestal basins are
connected to drains, it has no bottom nut to do up inside
the pedestal No longer should you accept anything less
than invisible pipework. It not only saves the Plumber
valuable time with one-man easy installation, but it
also delivers the neatest, aesthetically appealing connection
possible
|
 |
To Open Trap
Twist to open using a screw driver as a lever |
 |
To Reassemble Trap
- Locate ‘O’ ring on inverted inlet tube.
- Lube the outer housing with liquid soap or similar
- Fit together and twist (only until the plastic faces meet).
|
 |
|
 Installed
Wizard Trap
|
|
Pedestal basin with standard
s-trap installation
|
Pedestal basin with Wizard Trap installation |
 |
BIDET CONNECTION
Easy installation as the trap
slides below the floor level inside a 100mm pipe allowing
the bidet to sit flush with the floor without the usual
problem of no space for the trap.
RENOVATION WIZARD
The Wizard Trap is brilliant
in bathroom renovation. A W.C. waste pipe can convert
into a trapped shower waste, i.e. change a toilet into
a shower, just insert the trap inside the existing 100mm
pipework. This eliminates the need to jackhammer concrete
floors or redo existing stackwork (two storey), to trap
a wastepipe.
|
|
Limited Space Is No Obstacle for the Wizard Trap
|
 |
 |
| Limited Room Eyewash |
Wall Mounted Eyewash |
 |
 |
| Freestanding Eyewash |
Wizard Trap |
THE ‘WIZARD
INSPECTION OPENING’
Manufactured from ABS plastic, fully
tested by an independent laboratory is safe to use for all
drainage access openings. Fully watermark licensed to
AS 2887 - Plastic Waste Fittings. The
Wizard Inspection Opening can be used instead of cumbersome
bolted trap screws and will withstand all pedestrian and vehicular
traffic areas.
FULLY LICENSED TO THE APPROPRIATE AUSTRALIAN STANDARD
The advantage of the Inspection Opening is in its unique web design which makes
it strong enough to withstand the heaviest of vehicular traffic and yet still
remain small, light and easy to install, fitting inside 100mm pipe with the
mandatory 50mm pipe engagement. 
SAVES THE PLUMBER TIME
The Wizard I.O. is also timesaving for the installing plumber. It prevents
the need for a site visit prior to concrete being poured as no setup is required.The
plumber can simply instruct the concreter or tiler to work right up to the
pipe and the I.O. is neatly installed inside the pipe later.
EASY OPENING
The key way has been especially designed to suit most angle grinder
keys (no special tool required, just what you’ve already got
in your tool box) The white is attractive and ideal for tiled areas
and the grey for concrete
pathways and driveways etc., it simply blends in. Our Stainless Steel (316 marine Grade)
is ideal for food preparation areas and medical suites.
OTHER USES
Other uses for the Inspection Opening is as stop-ends for pipe fixed to vehicles
for carrying fishing rods, conduit, water etc. It also makes a child proof
cover for pest control bait traps for white ant treatment. 
Replace old cracked plastic inspection openings quickly and easily
with the Wizard I.O. as it slips right into the 100mm pipe.
|
|
